![]() Next, right click on your printer and select Printer properties (Win 7 & Vista) or Properties (Windows XP).Go to the Control Panel on your Computer and open Devices and Printers (Windows 7 and Vista) or Printers and Faxes (Windows XP).NOTE: Screen shots are from Windows 7, and should be similar for previous versions of Windows. But if you can't print, you will need to update the printer IP address on your PC. If successful, there's nothing else that needs to be done. Since you assigned a static IP address to your Printer, make sure your PC knows what the new IP address is.įirst, see if you can print. Now if power goes out or you need to restart your Linksys wireless router, your printer will retain the fixed IP address instead of being assigned a different address than it previously had from DHCP. If you have another device on your network that will be assign a fixed address, you would use:įor any other devices, just increment the IP address by one, 192.168.1.4, 192.168.1.5, etc and use the same Subnet Mask and Default Gateway. By using the default DHCP range, there is no configuration needed on the Linksys router. This configuration needs to be enter in the printer, not in the router (see the owners manual or vendor web site for steps on configuraing the printer TCP/IP information). It's important to note that even though you are not using any IP addresses in the default range for DHCP, the Subnet Mask and Default Gateway addresses will be the same. When configuring an address for the printer, the IP configuration would look like: NOTE: menus and screen shots may be different from your Linksys Wireless Router depending on the model you have. Your DHCP configuration will look similar to the following screenshot: Let's assume you are still using the default DHCP address range and your router is also using the default IP address of 192.168.1.1. This means that IP addresses you want to assign to devices, such as printers, need use an address in the range of 192.168.1.2 thru 192.168.1.99 or 192.168.1.150 thru 192.168.1.254 (assuming you are still using the default DHCP server range). Any fixed (static) IP address must be outside the DHCP server range. By default on Linksys wireless routers, the DHCP IP address range is typically 192.168.1.100 thru 192.168.1.149 and addresses cannot end in 0, 1, or 255.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |